Plastic Coating Processes | | Plastic Coatings Limited

Plastic Coatings is the leading coating specialist focused on world class solutions and services.

We offer the widest range of coating materials including Thermoset & Thermoplastic Polymers, Fluoropolymers, Electrophoretic or E-Coat Paint, Primers etc.

Whatever you require contact our experts to discuss the most effective and efficient solution to your individual requirements.

Pre-Treatment Processes

Any coating is only as good as its pre-treatment. The key to coating performance, whether its corrosion resistance, chemical resistance, coating adhesion etc is to have a properly applied coating over a suitable combination of pre-treatments.

Find out more
Electrophoretic Painting

E-Coat, EP Paint, Electropaint, known by various names, has become established in recent years as an economical corrosion resistant finish or a high performance primer widely adopted by the automotive sector and increasingly popular in other sectors.

Find out more
Powder Coating

Plastic Coatings Ltd have been applying powder coat or powder paint for more than forty years, we have 6 powder coating facilities to cater for small or large parts and small or large volume projects.

Find out more
Thermoplastic Dip Coating

The dipping of metal products into Thermoplastic powders is the oldest form of plastic coating and goes back to the time when Plastic Coatings was established in 1952.

Find out more
Electrostatically Sprayed Thermoplastics

The spraying of Thermoplastic Powders as opposed to the more common Electrostatic spraying of Epoxys and Polyesters also known as Thermoset materials (Powder Coating), is a speciality at Plastic Coatings.

Find out more
PTFE Coating

Plastic Coatings Ltd have dedicated production facilities for the application of high performance and technically advanced materials, including a range of PTFE type coatings such as Xylan, Xylar, Molykote® and Everslik®.

Find out more
Bonded Lubricant Coating

The application of Bonded Lubricants also takes place within the High Performance Section at Plastic Coatings Ltd. Applied in a similar fashion to PTFE coatings Bonded Lubricants have properties of their own.

Find out more
Plastisol Coating

The contract coating of products with PVC plastisols is unique to Plastic Coatings Ltd. This cost effective coating solution is excellent for applications where chemical resistance, impact protection, thermal insulation and abrasion resistance are required.

Find out more
Specialist Coating

Plastic Coatings Ltd have extensive experience in developing coating systems and specialist application processes to meet the demands of specific customers and markets.

Find out more
Shot Peening

Shot Peening is a cold working process, in which the surfaces of components are subjected to substantial impact from small spherical pieces of media called 'shot' which reduces the risk of fatigue failure and thereby extended service life.

Find out more
Small Components

For coating of smaller items we have a dedicated Small Components Coating Section, where we have the ability to fully coat or partially coat small components.

Find out more